Rear Paper Load Position; Bidirectional Adjustment - Compuprint X03 User Manual

Rear Paper Load Position

This parameter adjusts the distance of the first printable line to the top of the
paper from −30 to +360 units (2 in.) (where each unit is 0.176 mm [1/144 in.]). The
default value is 0.
To change or check the Rear Paper Load Position:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

Bidirectional Adjustment

You can adjust dot registration and print quality for characters on your printer by
running the bidirectional adjustment test pattern. The test pattern consists of three
parts: two groups of H's (four lines each) with the current alignment value above
them and a line of H's and I's printed on one line. You can set bidirectional
adjustment from -6 to 6 (where each unit is 0.212 mm [1/120 in.]). The default
value is 0.
Note: Bidirectional Adjustment is available only in the Operator Print Tests menu.
To change or check the bidirectional adjustment:
1. Press Test.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
120
User's Guide
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Rear Form Load Position
Paper Load Position is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
OPERATOR PRINT TESTS
Printer Adjustments
Printer Adjustments
Bidirectional Adjustment
Bidirectional Adjustment is displayed.