Rear Left Margin Alignment - Compuprint X03 User Manual

2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

Rear Left Margin Alignment

This parameter adjusts the distance of the first print position to the left margin
from 0 to 60 units (where each unit is 0.706 mm [1/36 in.]). The default is 0 units.
The total range of adjustment is 42.36 mm (1.66 in.).
To change or check the Rear Left Margin Align:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
Note: If the left margin alignment is too large for the current print line, an 005
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Rear Tear Position
Tear Position is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Rear Left Margin Align
Left Margin Align is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
MARGIN ERROR ADJ MARGIN/LINE LENGTH will occur. For more information on
the message, see Chapter 19, "Problem solving," on page 151.
Chapter 9. Printer adjustments
119