Nlq Typeface; Character Set - Compuprint X03 User Manual

8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

NLQ typeface

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer. This parameter allows you to set the font to be used for
Near Letter Quality printing. The following values are:
v Courier (Default)
v Gothic
To change or check the NLQ Typeface, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

Character set

You can set the character set to any of the following values:
v PC1 (PC Character Set 1) (Default)
v PC2 (PC Character Set 2)
v Italic (Epson-FX only)
To change or check the Character Set, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
Menu" on page 39.
CONFIGURATION MENU
ASCII Configuration
CONFIGURATION MENU

NLQ Typeface

NLQ Typeface is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration

Character Set

Chapter 7. ASCII Configuration
75