Emulation Mode - Compuprint X03 User Manual

Notes:
1. The printer performs a partial reset to put any change to this parameter value
2. This parameter can be overridden by the computer.
3. When either OCR-A or OCR-B is selected, the selectable options for CPI and
To change or check the print language value, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired language
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

Emulation mode

You can set Emulation Mode to the following values:
v 4247 (Default)
v 4224
v 4230
62
User's Guide
Table 13. Supported Print Languages (continued)
Code Page
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
into effect when you exit the Configuration Menu with START or RETURN.
Buffered data will be lost.
print quality become fixed at 10 CPI and Near Letter Quality, respectively.
CONFIGURATION MENU
IPDS Configuration
IPDS Configuration
Print Language
value is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
Language
USA/Canada + euro
Austrian/German + euro
Danish/Norwegian + euro
Finnish/Swedish + euro
Italian + euro
Spanish/Spanish Speaking + euro
English (UK) + euro
French + euro
International 5/Belgian New + euro
Icelandic + euro