Front Left Margin Alignment; Front Paper Load Position - Compuprint X03 User Manual

6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration

Front Left Margin Alignment

This parameter adjusts the distance of the first print position to the left margin
from 0 to 60 units (where each unit is 0.706 mm [1/36 in.]). The default is 0 units.
The total range of adjustment is 42.36 mm (1.66 in.).
To change or check the Front Left Margin Alignment:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
Note: If the left margin alignment is too large for the current print line, an 005

Front Paper Load Position

This parameter adjusts the distance of the first printable line to the top of the
paper from −30 to +360 units (2 in.) (where each unit is 0.176 mm [1/144 in.]). The
default value is 0.
To change or check the Front Paper Load Position:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Front Tear Position is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Front Left Margin Align
Front Left Margin Align is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
MARGIN ERROR ADJ MARGIN OR LINE LENGTH will occur. For more information
on the message, see Chapter 19, "Problem solving."
CONFIGURATION MENU
Printer Adjustments
Chapter 9. Printer adjustments
117