Supplies; Optional Features - Compuprint X03 User Manual

Note: For successful forms parking, the input forms stack MUST always be lower
Figure 38. Forms stacking recommendations

Supplies

Ribbon cartridges and paper are the only supplies you need for your printer. Use
Part Number 57P1743 when ordering a replacement ribbon cartridge.

Optional features

For more information on these optional features, contact your marketing
representative.
148
User's Guide
than the printer.
Output
Input
Floor
Input
Floor
Option
Printer Stand
Second forms tractor
Controller Board
76 mm
(3.0 in.)
51 mm
(2 inches)
736 - 762 mm
(29 - 30 in.)
Output
An optional stand provides input and output shelves for
handling fanfold paper.
An optional second tractor can be installed. In this way it is
possible to handle two different types of fanfold paper
simultaneously with the printer.
There are three Controller Board options:
1. Allows a host connection to parallel, serial, and USB 2.0
interfaces.
2. Allows a host connection to parallel and ASCII Ethernet
10/100 BaseT LAN interfaces.
3. Allows a host connection to parallel and ASCII-IPDS
Ethernet 10/100 BaseT LAN interfaces
Output
Input
Top of Stack
Lower than Printer
Shelf
Shelf
Floor
Description
381 mm
(15 in.)