Power-On Paper Source - Compuprint X03 User Manual

v Custom Set D
v Custom Set E
v Custom Set F
v Custom Set G
v Custom Set H
To change or check the power-on custom set, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired custom set for
7. Press ENTER.
8. Use START or RETURN to exit the Menu. See "Exiting the Configuration

Power-On Paper Source

The Power-On Paper Source allows you to select which paper source is to be used
when the printer is turned on. The Last Used value means that the paper source
used before the printer was powered off is to be used as the power-on paper
source.
You can change the Power-On Paper Source to:
v Front (Default)
v Rear
v Last Used
Selecting Last Used causes the Paper Source parameter (in the Printer Setup menu)
to be updated whenever the data stream selects a paper source. If the data stream
attempts to select the operator panel setting for power-on paper source, the most
recently selected paper source will be used instead.
To change or check the power-on paper source, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
52
User's Guide
CONFIGURATION MENU
Configuration Storage
Configuration Storage
Power-On Custom Set
the new power-on custom set is displayed.
An asterisk (*) will be displayed in front of the selected custom set.
Menu" on page 39.
CONFIGURATION MENU
Configuration Storage