Chapter 11. Display Language; Display Languages - Compuprint X03 User Manual

Chapter 11. Display Language

The following languages are available for displaying messages on the operator
panel:
To change or check the display language, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
5. Press ENTER.
6. Press START or RETURN to exit the Menu. See "Exiting the Configuration
Note: Occasionally the display language may be changed accidentally to a
Table 16. Display Languages
Language
English (Default)
Deutsch
Français
Italiano
Español
Nederlands
Dansk
Português
Norsk
Svenska
Suomi
Polski
Note: The display language changes immediately when you select a new value.
CONFIGURATION MENU
Display Language
display language is displayed.
An asterisk (*) will be displayed in front of the selected value, and the display
language will change.
Menu" on page 39.
language that is not understood. To recover to your native language without
saving the display language in a custom set, power off (O) and then power
on (|) the printer to restore the default setting. The display language should
then be restored to your native language.
Value
000
001
002
003
004
005
006
007
008
009
010
011
125