Configuration Storage; Attachment; Ipds Configuration; Configuration Storage Category - Compuprint X03 User Manual

Configuration storage

Table 1 lists the parameters available for the Configuration Storage Category. Refer
to Chapter 4, "Configuration storage" for detailed information on setting these
parameters.
Table 1. Configuration Storage Category
Parameters
Save Current Values
Recall Custom Set
Power-On Custom Set
Power-On Paper Source
Recall Factory Defaults
Note: Use Recall Factory Defaults to set all the parameters to the manufacturing default
values. See "Recall factory defaults" on page 53.

Attachment

Table 2 lists the parameters available for the Attachment Category. Refer to
Chapter 5, "Attachment options," on page 55 for detailed information on setting
these parameters
Table 2. Attachment Category
Parameters
Attachment

IPDS Configuration

Table 3 lists the parameters available for the IPDS Configuration Category.
Parameters that can be overridden by the computer are noted with a dagger (†).
Refer to Chapter 6, "IPDS Configuration," on page 57 for detailed information on
setting these parameters
Table 3. IPDS Configuration Category
Parameters
† Characters Per Inch
† Lines Per Inch
† Maximum Print Position
† Maximum Page Length
† Print Quality
Values
Custom Set A-H
Custom Set A-H
Last Used
Custom Set A-H
Front
Rear
Last Used
Yes
Values
Hot Port Switch, Parallel,
Serial, USB, LAN ASCII,
LAN IPDS
Values
10
12
15
16.7
6
8
001 to 227
001 to 880
DP Quality
DP Text Quality
Near Letter Quality
Chapter 3. Checking and changing configuration parameter values
Default
N/A
N/A
Last Used
Front
N/A
Default
Hot Port Switch
Default
10
6
132
066
DP Quality
41