Form Feed Mode - Compuprint X03 User Manual

Form Feed Mode

You can set Form Feed Mode to either of the following values:
v Not Active In Ready State (Default)
v Active In Ready State
Selecting Active in Ready State makes the FORM FEED key active when the
printer is ready and no job is processing, so that when pressed, a form feed will be
performed and the printer will return to the ready state.
The printer does not have to be not ready before pressing FORM FEED if you
change the value to Active in the ready state.
To change or check the form feed mode:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
CONFIGURATION MENU
Printer Setup
Printer Setup
Form Feed Mode
form feed mode is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
105
Chapter 8. Printer setup