Rear Forms Backup - Compuprint X03 User Manual

Rear Forms Backup

This parameter is displayed as long as the second (optional) tractor is installed and
applies to the paper loaded on the default (lower) tractor. The Rear Forms Backup
parameter instructs the printer whether it can perform tractor movements that
would back the forms up. Such movements include parking the printer. This
would be used when the physical characteristics of the forms currently loaded
make it undesirable for the printer to attempt to move the forms in the reverse
direction (for example, labels).
Even if Rear Forms Backup is disabled, the SCROLL/MICRO can still be used for
the paper path. You can define the rear forms backup to any one the following
values:
Enabled (Default)
Disabled
To change or check the Rear Forms Backup:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
CONFIGURATION MENU
Printer Setup
Printer Setup
Rear Forms Backup
Forms Backup is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
Allows the printer to back up the rear forms as
needed.
Prevents the printer from backing up rear forms.
103
Chapter 8. Printer setup