Compuprint X03 User Manual page 166

Periodic cleaning will help keep your printer in top condition so that it will always
provide optimal performance.
Before you clean the printer:
1. Power off (O) the printer.
2. Unplug the power cord.
3. Wait at least 15 minutes for the printhead to cool before starting this procedure.
Cleaning inside the printer
Every few months, use a soft brush and a vacuum cleaner to remove dust, ribbon
lint, and pieces of paper. Remove the ribbon cartridge to prevent the ribbon from
going into the vacuum cleaner. Vacuum any dust from around the printhead and
in the printer cavity.
Attention: Do not allow any staples, paper clips, or small metal pieces to fall
Cleaning the covers
Clean the outside of the printer with a damp cloth and mild soap. Do not use any
spray-type or chemical cleaners anywhere on your printer. Do not put any liquids
or spray near the air vents. For stubborn ink stains on the cover, use a commercial
mechanic's hand cleaner.
Do not use an abrasive cloth, alcohol, paint thinner, or similar agents because they
may cause discoloration or scratching.
150
User's Guide
!
CAUTION:
<2-22> Carefully follow all cleaning instructions, using only the materials and
solutions recommended.
inside the printer.