Recall Factory Defaults - Compuprint X03 User Manual

5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired Power-on
7. Press ENTER.
8. Use START or RETURN to exit the Menu. See "Exiting the Configuration

Recall factory defaults

This function sets all parameter values to the original manufacturing default
values, except Vital Product Data and Printer Address (Twinax attachment). These
settings can only be changed through their own menu selection.
The printer is shipped with all of the custom sets set to manufacturing default
values and custom set A as the power-on custom set. The Recall Factory Defaults
function does not affect the values saved in custom sets.
Note: When factory defaults are recalled, a partial reset is automatically performed
To recall the factory defaults, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER.
6. Press ENTER.
7. Use START or RETURN to exit the Menu. See "Exiting the Configuration
Configuration Storage
Power-On Paper Source
Paper Source value is displayed.
An asterisk (*) will be displayed in front of the selected paper source.
Menu" on page 39.
when exiting from the configuration menu if the value of at least one of the
parameters that requires a partial reset has been changed. Buffered data will
be lost.
CONFIGURATION MENU
Configuration Storage
Configuration Storage
Recall Factory Defaults
The printer displays
Recall Factory Defaults
Yes
The printer displays
Recall Factory Defaults
Factory Defaults Recalled
Menu" on page 39.
Chapter 4. Configuration storage
53