Continuous Forms Eject Mode - Compuprint X03 User Manual

Continuous Forms Eject Mode

You can set Continuous Forms Eject Mode value to:
v Immediate Eject (Default)
v Delayed Eject
Selecting Delayed Eject causes the printer to wait until the end of the current page
is reached before forms are moved to the tear off position. For more information,
see "LOAD/EJECT" on page 33.
To change or check Continuous Forms Eject Mode:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
CONFIGURATION MENU
Printer Setup
Printer Setup
Forms Eject Mode
Continuous Forms Eject Mode is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
109
Chapter 8. Printer setup