Override Host Parameters; Paper Source - Compuprint X03 User Manual

Override Host parameters

Note: Override Host is not available for IPDS.

Paper source

This parameter allows the printer to accept or ignore (override) the Paper Source
selection commands that are sent by the host data stream. You can set Paper
Source to:
Disabled
(Default)
Enabled
To change or check the Paper Source:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER, and the printer displays
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
8. Press ENTER.
9. Press START or RETURN to exit the Menu. See "Exiting the Configuration
82
User's Guide
The printer accepts and processes commands received from the host data
stream for paper source selection.
The printer ignores commands received from the host data stream that
specify paper source selection. The printer will use the paper source selected
at the operator panel. Commands sent from the host cannot override the
paper source selected at the operator panel.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Override Host
Override Host

Paper Source

Paper Source is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.