Operating And Service Clearance; Weight; Power Consumption; Heat Output - Compuprint X03 User Manual

Operating and service clearance

You should provide adequate space for cooling air, and for operating or
maintaining the printer. This is also helpful if you will occasionally change the
Controller Board. Often, as little as 450 mm (18 in.) of extra table space (or floor
space, for a printer on the optional printer stand) is adequate to service a printer.
Figure 43. Printer clearances.

Weight

Power consumption

Heat output

166
User's Guide
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
Category
Maximum (Peak)
Operating (Maximum Typical)
Power Saver Mode*
Idle (Off Mode)
*Power Saver timeout is 23 seconds.
Category
Operating (Maximum Typical)
Idle
115 Vac
60 Hz
220 Watts
155 Watts
19.2 Watts
0.1 Watts
115 Vac
60 Hz
147 Watts (500 BTU/hr)
23 Watts (75 BTU/hr)
230 Vac
50 Hz
210 Watts
145 Watts
20.2 Watts
0.1 Watts
230 Vac
50 Hz
138 Watts (470 BTU/hr)
23 Watts (75 BTU/hr)