Cli: Viewing And Configuring Authorized Ip Managers; Listing The Switch's Current Authorized Ip Manager(S) - HP procurve switch 2650 Access Security Manual

Using Authorized IP Managers
Defining Authorized Management Stations
Figure 7-2. Example of How To Add an Authorized Manager Entry (Continued)
7-6
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag-
ers List screen (figure 7-1), highlight the desired entry, and press
or (for Delete).

 

CLI: Viewing and Configuring Authorized IP Managers

Authorized IP Managers Commands Used in This Section
Command
show ip authorized-managers
ip authorized-managers
<ip-address>
mask <mask-bits>
<operator | manager>

Listing the Switch's Current Authorized IP Manager(s)

Use the show ip authorized-managers command to list IP stations authorized to
access the switch. For example:
Figure 7-3. Example of the Show IP Authorized-Manager Display
2. Enter an Authorized Manager IP address here.
3. Use the default mask to allow access by one
management device, or edit the mask to allow
access by a block of management devices. See
"Building IP Masks"on page 7-9.
4. Use the Space bar to select Manager or Operator
access.
5. Press , then (for Save) to configure the IP

     
 
Authorized Manager entry.
Page
below
7-7
7-8
7-8
(for Edit)