Cli: Viewing And Configuring Authorized Ip Managers - HP E3800-24G-PoE+-2SFP+ Access Security Manual

Using Authorized IP Managers
Defining Authorized Management Stations
HP Switch
==========================- CONSOLE - MANAGER MODE -============================
Authorized Manager IP: 10.10.245.3
IP Mask [255.255.255.255]:255.255.255.255
Access Level:Operator
Access Method:ssh
Actions-> Back
Figure 15-2. Example of Edit Menu for Authorized IP Managers
15-6
Switch Configuration - IP Managers
Add Edit
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag-
ers List screen (figure 15-1), highlight the desired entry, and press
(for Delete).
or
[D]

CLI: Viewing and Configuring Authorized IP Managers

Authorized IP Managers Commands Used in This Section
Command
show ip authorized-managers
ip authorized-managers
<ip-address>
mask <mask-bits>
access <operator | manager>
access-method
Listing the Switch's Current Authorized IP Manager(s)
Use the show ip authorized-managers command to list IP stations authorized to
access the switch. For example:
Enter an Authorized Manager IP address here.
Use the default mask to allow access by one
management device, or edit the mask to allow
access by a block of management devices. See
"Building IP Masks" on page 15-11.
Use the Space bar to select Manager or Operator
access.
Press [Enter], then [S] (for Save) to configure the
IP Authorized Manager entry.
Delete Help
Page
below
15-8
15-8
15-8
15-7
15-7
22-Apr-2008 20:17:53
(for Edit)
[E]