Cli: Viewing And Configuring Authorized Ip Managers; Listing The Switch's Current Authorized Ip Manager(S) - HP ProCurve 6400cl Series Access Security Manual

Using Authorized IP Managers
Defining Authorized Management Stations
App es only to access through Telnet, SNMPv1, li
and SNMPv2c. Refer to the note on page 12-3.
Figure 12-2. Example of How To Add an Authorized Manager Entry (Continued)
12-6
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag­
ers List screen (figure 12-1), highlight the desired entry, and press
or (for Delete).
[D]

CLI: Viewing and Configuring Authorized IP Managers

Authorized IP Managers Commands Used in This Section
Command
show ip authorized-managers
ip authorized-managers
<ip-address>
mask <mask-bits>
<operator | manager>

Listing the Switch's Current Authorized IP Manager(s)

Use the show ip authorized-managers command to list IP stations authorized to
access the switch. For example:
2. Enter an Author zed Manager IP address here. i
3. Use the default mask to allow access by one
management device, or edit the mask to a ow
access by a b ock of management devices. See l
"Building IP Masks" on page 12-9.
4. Use the Space bar to select Manager or Operator
access.
5. Press [Enter] , then [S] (for Save
IP Author zed Manager entry. i
Page
below
12-7
12-8
12-8
ll
) to configure the
(for Edit)
[E]