How To Install The Onyx Printer Driver - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

How to Install the ONYX Printer Driver

Introduction
This section explains how to install and configure the ONYX workflow
software installation files on your printer.
Purpose
The printer installation file configures the ONYX software so that it knows
how to communicate with the printer. This prepares the printer so that the
operator can manage print jobs.
Before you begin
Make sure that the ONYX workflow software (Thrive or ProductionHouse)
is installed before you install the printer driver.
NOTE
The ONYX Printer Installation Driver File can be installed as the final step
in the installation of the ONYX software application or it can be
downloaded separately and installed later. However, it must be available
for the software to communicate with the printer.
Procedure
1.
Power on the printer.
2. Select the Setup tab in the printer software to access the printer's network
name.
3.
Verify that there is an Ethernet network connection between the ONYX
host computer and the printer. To do this click on the Windows Start
button the select My Computer, My Network Places and ensure that the
network name for the printer is on the list.
4.
Install the Printer Installation File on the ONYX host computer (if you have
not already done this during the installation of the software). To install,
click Start, All Programs, then ProductionHouse or Thrive and select Add
Printer.
5.
Select the media to be installed and continue with the installation.
6.
After the printer driver is installed the Configure Printer Port window will
launch automatically. Select TCP/IP Printer then click on Configure.
How to Install the ONYX Printer Driver
Chapter 5 - How to Operate Your Océ Arizona Printer 83