How To Install The Onyx Printer Driver - Oce Arizona 200 GT User Manual

How to Install the Onyx Printer Driver

Introduction
This section explains how to install and configure the Onyx ProductionHouse
Arizona 200/250 GT printer installation file.
Purpose
The printer installation file configures the Onyx software so that it knows how to
communicate with the Arizona 200/250 GT. This prepares the printer so that the
operator can manage print jobs.
Before you begin
Make sure that the Onyx ProductionHouse application software is installed before
you install the printer driver.
Note: The Onyx Printer Installation Driver File can be installed as the final step in
the installation of the Onyx ProductionHouse software application or it can be
downloaded separately and installed later. However, it must be available for the
software to communicate with the printer.
Installation Procedure
Power on the printer.
1.
Select the Setup tab in the printer software to access the printer's network name.
2.
Verify that there is an Ethernet network connection between the ProductionHouse
3.
computer and the printer. To do this click on the Windows Start button the select My
Computer, My Network Places and ensure that the network name for the Arizona
200/250 GT is on the list.
Install the Arizona 200/250 GT Printer Installation File on the ProductionHouse
4.
computer (if you have not already done this during the installation of the
ProductionHouse software). To install, click Start, All Programs, then
ProductionHouse and select Add Printer.
Select the media to be installed and continue with the installation.
5.
How to Install the Onyx Printer Driver
79