How To Install The Onyx Printer Driver - Oce Arizona 200 GT User Manual

How to Install the Onyx Printer Driver

How to Install the Onyx Printer Driver
Introduction
This section explains how to install and configure the Onyx ProductionHouse Océ Arizona
200/250/300/350 GT printer installation file.
Purpose
The printer installation file configures the Onyx software so that it knows how to com-
municate with the Océ Arizona 200/250/300/350 GT. This prepares the printer so that
the operator can manage print jobs.
Before you begin
Make sure that the Onyx ProductionHouse application software is installed before you
install the printer driver.
Note:
The Onyx Printer Installation Driver File can be installed as the final step in the instal-
lation of the Onyx ProductionHouse software application or it can be downloaded sep-
arately and installed later. However, it must be available for the software to communicate
with the printer.
Installation Procedure
Power on the printer.
1.
Select the Setup tab in the printer software to access the printer's network name.
2.
Verify that there is an Ethernet network connection between the ProductionHouse
3.
computer and the printer. To do this click on the Windows Start button the select My
Computer, My Network Places and ensure that the network name for the Océ Arizona
200/250/300/350 GT is on the list.
Install the Océ Arizona 200/250/300/350 GT Printer Installation File on the Production-
4.
House computer (if you have not already done this during the installation of the Produc-
tionHouse software). To install, click Start, All Programs, then ProductionHouse and
select Add Printer.
Select the media to be installed and continue with the installation.
5.
90 Chapter 5 - How to Operate the Océ Arizona 200/250/300/350 GT