Tips for Configuring VMotion
To use the VMotion feature, follow the guidelines listed below:
•
Set up a gigabit ethernet migration network and a VMkernel port group
between all the copies of ESX configured for VMotion.
•
Create consistent network labels for each of the network port groups to
which VMs are attached.
For information on the VMotion configuration setup, see the VMware
documentation at vmware.com/support/pubs.
For information on VMotion compatibility, see the VMware VMotion and
64-Bit Virtual Machine Support for Dell PowerEdge Systems available at
support.dell.com/manuals.
Installing vCenter Server
For information about installing or upgrading vCenter Server, see the
Installation Guide and Upgrade Guide for ESX 4 under VMware vSphere 4 at
vmware.com/support/pubs.
vCenter Server is supported on a limited set of Windows operating systems.
For more information, see vmware.com/support/pubs.
Related Information
NOTE:
For Dell VMware documentation including systems management for
VMware, see support.dell.com/manuals. Navigate to Software, select
Virtualization Solutions and then VMware Software.
•
For information on downloading ESX and licensing options, see
VMware vSphere 4 on Dell PowerEdge Systems Getting Started Guide at
support.dell.com/manuals.
•
For more information about different vSphere editions, see
VMware vSphere Editions Comparison at vmware.com.
•
For a complete list of Dell-supported systems and storage, see VMware
ESX/ESXi 4 on Dell PowerEdge Systems and Storage Compatibility Matrix
at support.dell.com/manuals.
•
For known issues, see VMware vSphere 4 on Dell PowerEdge Systems
Release Notes at support.dell.com/manuals.
30
ESX Deployment Guide