Known And Recently Resolved Issues; Dell Feature Implementation Schedule For Awms - Dell PowerConnect W-Airwave Manual

Note: Without proper Telnet/SSH credentials AWMS will not be able to acquire license and serial
information from controllers.
SNMPv3 credentials are required for wms offload.
Username

Auth password

Privacy password

Auth protocol


Known and Recently Resolved Issues

AWMS
Description
Impact
AP-105s report noise floor at 20 dBm worse than
actual. AMP utilizes noise floor to calculate
client signal quality. Poor signal quality can
7.x reduce location accuracy.
The 651 controllers do not provide signal quality
7.x and BW for clients associated to the internal AP.
wms offload does not work for APs on tagged
7.x ports. This cause client tracking issues in AMP
Because of telnet service contention AMP
device auditing fails and causes mismatches on
7.x Dell PowerConnect W controllers

Dell Feature Implementation Schedule for AWMS

Feature
Ability filter User Session by Dell PowerConnect ArubaOS roles
AOS 5.0 support
RAP white list management for RN 3.1
Added support for rogue containment
Added support for configuring controller specific overrides
Client dot11counter status
Resolution
VisualRF adds 20 dBm to client signal in
order to increase location accuracy.
AMP will show very low signal for all
client associated with AP-105s.
7.1 will provide a more efficient method
to fetching controller settings.
AWMS Implementation
7.0
7.0
7.0
7.0
7.0
7.0