Understanding The Aps/Devices > Interfaces Page - Dell PowerConnect W-Airwave User Manual

Understanding the APs/Devices > Interfaces Page
Monitoring Data for Wired Devices (Routers and Switches) showed you how to view high- level interface
information for all physical and virtual interfaces on an entire router or switch. Select any interface hotlink in the
Interface column of the Physical or Virtual Interfaces tables on the stacked switches to go to an Interface
Monitoring page displaying data relevant to that specific interface, as shown
Figure 92.
Figure 92 Interface Monitoring Page for a Wired Device
An Interface Monitoring page is comprised of three sections: Interface Information, Bandwidth and Interface
Frame Counters graphs, and Connected Users.
Specifics of the interface are in the Interface Information section, as depicted in Figure 93.
Figure 93 Individual Interface Information Section
Bandwidth, and various standard and enterprise specific error counting information is displayed in the lower
section in a tabbed graph, which are shown in Figure 92 above.
Connected Users, if any, are listed in a table below the interactive graphs as shown in Figure 94.
Figure 94 Connected Users list in APs/Devices > Interface Monitoringfor a selected interface
What Next?
All device lists in AirWave act as portals to management pages if you have the proper read/write privileges.
Selecting the wrench or pencil icon next to a device table entry, or selecting Modify Devices where appropriate
Dell PowerConnect W-AirWave | User Guide Discovering, Adding, and Managing Devices | 129