Understanding The Aps/Devices > Interfaces Page - Dell PowerConnect W-Airwave User Manual

Understanding the APs/Devices > Interfaces Page
"Monitoring Data for Wired Devices (Routers and Switches)" on page 130 showed you how to view high- level
interface information for all physical and virtual interfaces on an entire router or switch. Select any interface
hotlink in the Interface column of the Physical or Virtual Interfaces tables on the stacked switches to go to an
Interface Monitoring page displaying data relevant to that specific interface, as shown Figure 92.
Figure 92 Interface Monitoring Page for a Wired Device
An Interface Monitoring page is comprised of three sections: Interface Information, Usage and Interface Frame
Counters graphs, and Connected Clients.
Specifics of the interface are in the Interface Information section, as depicted in Figure 93.
Figure 93 Individual Interface Information Section
Bandwidth, and various standard and enterprise specific error counting information is displayed in the lower
section in a tabbed graph, which are shown in Figure 92 above.
Connected Clients, if any, are listed in a table below the interactive graphs as shown in Figure 94.
Figure 94 Connected Clients list in APs/Devices > Interface Monitoring for a selected interface
132 | Discovering, Adding, and Managing Devices Dell PowerConnect W-AirWave 7.4 | User Guide