Vlan Stacking Configuration Example - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Network configuration guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

Configuring VLAN Stacking

VLAN Stacking Configuration Example

This section provides a tutorial for configuring the sample application, as illustrated on
VLAN Stacking Ethernet services. This tutorial assumes that both provider edge switches (PE1 and PE2)
are operating in the VLAN Stacking service mode.
1
Configure SVLAN 100 and SVLAN 200 on PE1 and PE2 switches using the
command.
-> ethernet-service svlan 100
-> ethernet-service svlan 200
2
Configure two VLAN Stacking services on PE1 and PE2 using the
command. Configure one service with the name "CustomerA" and the other service with the name
"Customer B". Assign "CustomerA" service to SVLAN 100 and "CustomerB" service to SVLAN 200.
-> ethernet-service service-name CustomerA svlan 100
-> ethernet-service service-name CustomerB svlan 200
3
Configure port 3/1 on PE1 and PE2 as VLAN Stacking NNI ports using the
nni
command. Associate each port with both SVLAN 100 and SVLAN 200.
-> ethernet-service svlan 100 nni port 3/1
-> ethernet-service svlan 200 nni port 3/1
4
Configure a VLAN Stacking SAP with ID 20 on PE1 and PE2 using the
ate the SAP with the "CustomerA" service.
-> ethernet-service sap 20 service-name CustomerA
5
Configure a VLAN Stacking SAP with ID 30 on PE1 and PE2 using the
command. Associate the SAP with the "CustomerB" service.
-> ethernet-service sap 30 service-name CustomerB
6
Configure port 1/1 on PE1 and PE2 as a VLAN Stacking UNI port and associate 1/1 with SAP 20
using the
ethernet-service sap uni
-> ethernet-service sap 20 uni port 1/1
7
Configure port 2/1 on PE1 and PE2 as a VLAN Stacking UNI port and associate 2/1 with SAP 30
using the
ethernet-service sap uni
-> ethernet-service sap 30 uni port 2/1
8
Configure SAP 20 on PE1 and PE2 to accept all customer traffic using the
command.
-> ethernet-service sap 20 cvlan all
9
Configure SAP 30 on PE1 and PE2 to accept only customer traffic that is tagged with CVLAN 10
using the
ethernet-service sap cvlan
-> ethernet-service sap 30 cvlan 10
OmniSwitch AOS Release 7 Network Configuration Guide
command.
command.
command.
March 2011
VLAN Stacking Application Example
page
27-20, using
ethernet-service svlan
ethernet-service service-name
ethernet-service svlan
ethernet-service
sap. Associ-
ethernet-service sap
ethernet-service sap cvlan
page 27-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents