Verifying The Vlan Stacking Configuration - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Verifying the VLAN Stacking Configuration

Verifying the VLAN Stacking Configuration
You can use CLI show commands to display the current configuration and statistics of service-based
VLAN Stacking on a switch. These commands include the following:
show ethernet-service vlan
show ethernet-service
show ethernet-service sap
show ethernet-service nni
show ethernet-service uni
show ethernet-service uni-profile
show ethernet-service sap-profile
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show ethernet-service command is also given in
Steps for Configuring VLAN Stacking" on page
page 27-24
Displays the SVLAN configuration for the switch.
Displays the VLAN Stacking service configuration for the switch.
Displays the VLAN Stacking service access point (SAP) configura-
tion for the switch.
Displays configuration information for NNI port parameters.
Displays profile associations for UNI ports.
Displays UNI profile attribute values.
Displays SAP profile attribute values.
27-8.
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring VLAN Stacking
"Quick
March 2011