Vrrp Specifications; Vrrp Defaults - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Configuring VRRP

VRRP Specifications

Platforms Supported
RFCs Supported
Compatible with HSRP
Maximum number of VRRPv2 and VRRPv3
virtual routers
Maximum number of IP addresses per
instance

VRRP Defaults

The following table lists the defaults for VRRP configuration through the
command keywords:
Description
Virtual router enabled or dis-
abled
Priority
Preempt mode
Advertising interval
The following table lists the defaults for VRRP configuration using the VRRP collective management
features and the relevant command:
Default advertising interval for
all the virtual routers on the
switch.
Default priority value for all the
virtual routers on the switch.
Default preempt mode for all the
virtual routers on the switch.
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers on the switch.
Default advertising interval for
all the virtual routers in the
group.
Default priority value for all the
virtual routers in the group.
OmniSwitch AOS Release 7 Network Configuration Guide
OmniSwitch 10K
RFC 3768–Virtual Router Redundancy Protocol
RFC 2787–Definitions of Managed Objects for the Virtual
Router Redundancy Protocol
No
255
16
Keyword
enable | disable | on | off
priority
preempt | no preempt
advertising interval
vrrp interval
vrrp priority
vrrp preempt
vrrp set
vrrp group
vrrp group
March 2011
VRRP Specifications
vrrp command and the relevant
Default
Virtual routers are disabled (off)
100
Preempt mode is enabled
1 second (100 centiseconds)
1 second (100 centiseconds)
100
preempt
all
1
100
page 18-3