Vlan Stacking Configuration Example - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

VLAN Stacking Application Example

VLAN Stacking Configuration Example

This section provides a tutorial for configuring the sample application, as illustrated on
VLAN Stacking Ethernet services. This tutorial assumes that both provider edge switches (PE1 and PE2)
are operating in the VLAN Stacking service mode.
1
Configure SVLAN 100 and SVLAN 200 on PE1 and PE2 switches using the
command.
-> ethernet-service svlan 100
-> ethernet-service svlan 200
2
Configure two VLAN Stacking services on PE1 and PE2 using the
command. Configure one service with the name "CustomerA" and the other service with the name
"Customer B". Assign "CustomerA" service to SVLAN 100 and "CustomerB" service to SVLAN 200.
-> ethernet-service service-name CustomerA svlan 100
-> ethernet-service service-name CustomerB svlan 200
3
Configure port 3/1 on PE1 and PE2 as VLAN Stacking NNI ports using the
command. Associate each port with both SVLAN 100 and SVLAN 200.
-> ethernet-service svlan 100 nni 3/1
-> ethernet-service svlan 200 nni 3/1
4
Configure a VLAN Stacking SAP with ID 20 on PE1 and PE2 using the
ate the SAP with the "CustomerA" service.
-> ethernet-service sap 20 service-name CustomerA
5
Configure a VLAN Stacking SAP with ID 30 on PE1 and PE2 using the
command. Associate the SAP with the "CustomerB" service.
-> ethernet-service sap 30 service-name CustomerB
6
Configure port 1/1 on PE1 and PE2 as a VLAN Stacking UNI port and associate 1/1 with SAP 20
using the ethernet-service sap uni
-> ethernet-service sap 20 uni 1/1
7
Configure port 2/1 on PE1 and PE2 as a VLAN Stacking UNI port and associate 2/1 with SAP 30
using the ethernet-service sap uni
-> ethernet-service sap 30 uni 2/1
8
Configure SAP 20 on PE1 and PE2 to accept all customer traffic on UNI port 1/1 using the
service sap cvlan command.
-> ethernet-service sap 20 cvlan all
9
Configure SAP 30 on PE1 and PE2 to accept only customer traffic that is tagged with CVLAN 10
using the ethernet-service sap cvlan
-> ethernet-service sap 30 cvlan 10
page 9-22
command.
command.
command.
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring VLAN Stacking
page 9-21, using
ethernet-service
ethernet-service service-name
ethernet-service svlan nni
ethernet-service sap. Associ-
ethernet-service sap
ethernet-
September 2009