Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 163

Configuring Dynamic Link Aggregation
For example, to display detailed statistics for port 1 in slot 2 that is attached to dynamic link aggregate
group 1, enter:
-> show linkagg port 2/1
A screen similar to the following would be displayed:
Dynamic Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Primary port
LACP
Actor System Priority
Actor System Id
Actor Admin Key
Actor Oper Key
Partner Admin System Priority
Partner Oper System Priority
Partner Admin System Id
Partner Oper System Id
Partner Admin Key
Partner Oper Key
Attached Agg Id
Actor Port
Actor Port Priority
Partner Admin Port
Partner Oper Port
Partner Admin Port Priority
Partner Oper Port Priority
Actor Admin State
Actor Oper State
Partner Admin State
Partner Oper State
Note.
When the multi-chassis link aggregation feature is activated on the switch, the show linkagg port
command displays the output as MC-Dynamic Aggregable Port.
See the "Link Aggregation Commands" chapter in the OmniSwitch CLI Reference Guide for complete
documentation of show commands for link aggregation.
OmniSwitch AOS Release 7 Network Configuration Guide
Displaying Dynamic Link Aggregation Configuration and Statistics
: 2001,
: 2/1,
: ENABLED,
: DOWN,
: CONFIGURED,
: DOWN,
: NONE,
: UNKNOWN,
: 10,
: [00:d0:95:6a:78:3a],
: 8,
: 8,
: 20,
: 20,
: [00:00:00:00:00:00],
: [00:00:00:00:00:00],
: 8,
: 0,
: 0,
: 7,
: 15,
: 0,
: 0,
: 0,
: 0,
: act1.tim1.agg1.syn0.col0.dis0.def1.exp0,
: act1.tim1.agg1.syn0.col0.dis0.def1.exp0,
: act0.tim0.agg1.syn1.col1.dis1.def1.exp0,
: act0.tim0.agg1.syn0.col1.dis1.def1.exp0
March 2011 page 7-31