Chapter 19 Configuring Server Load Balancing; Server Load Balancing Specifications - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Server Load Balancing Specifications

Server Load Balancing Specifications
The table below lists specifications for Alcatel-Lucent's SLB software.
Platforms Supported
Maximum number of clusters
Maximum number of physical servers per cluster 32
Layer-3 classification
Layer-2 classification
Server health checking
High availability support
Networking protocols supported
Maximum number of probes on a switch
page 19-2
OmniSwitch 10K
32
Destination IP address
QoS policy condition
QoS policy condition
Ping, link checks
Hardware-based failover, VRRP, Chassis
Management Module (CMM) redundancy
Virtual IP (VIP) addresses
40
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Server Load Balancing
March 2011