Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 132

Displaying Static Link Aggregation Configuration and Statistics
For example, to display detailed statistics for port 1 in slot 2 that is attached to static link aggregate group
1, enter:
-> show linkagg port 4/1
A screen similar to the following would be displayed:
Static Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Port position in the aggregate : 0,
Primary port
Note. See the "Link Aggregation Commands" chapter in the OmniSwitch CLI Reference Guide for
complete documentation of show commands for link aggregation.
page 6-12
: 2001,
: 4/1,
: ENABLED,
: UP,
: ATTACHED,
: UP,
: 1,
: YES
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Static Link Aggregation
March 2011