Up to 200 ARP filters can be defined on a single switch. To remove an individual filter, use the no form of
the arp filter command. For example:
-> no arp filter 198.0.0.0
To clear all ARP filters from the switch configuration, use the
-> clear arp filter
Use the
show arp filter
and other ARP filter commands, see the OmniSwitch CLI Reference Guide.
OmniSwitch AOS Release 7 Network Configuration Guide
command to verify the ARP filter configuration. For more information about this
clear arp filter
March 2011
command. For example:
page 1115