Configuring IPv6
Route Map Redistribution Example
The following example configures the redistribution of OSPFv3 routes into a RIPng network using a route
map (ospf-to-rip) to filter specific routes:
-> ip route-map ospf-to-rip sequence-number 10 action deny
-> ip route-map ospf-to-rip sequence-number 10 match tag 5
-> ip route-map ospf-to-rip sequence-number 10 match route-type external type2
-> ip route-map ospf-to-rip sequence-number 20 action permit
-> ip route-map ospf-to-rip sequence-number 20 match ipv6-interface intf_ospf
-> ip route-map ospf-to-rip sequence-number 20 set metric 255
-> ip route-map ospf-to-rip sequence-number 30 action permit
-> ip route-map ospf-to-rip sequence-number 30 set tag 8
-> ip redist ospf into rip route-map ospf-to-rip
The resulting ospf-to-rip route map redistribution configuration does the following:
•
Denies the redistribution of Type 2 external OSPFv3 routes with a tag set to five.
•
Redistributes into RIPng all routes learned on the intf_ospf interface and sets the metric for such routes
to 255.
•
Redistributes into RIPng all other routes (those not processed by sequence 10 or 20) and sets the tag for
such routes to eight.
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Route Map Redistribution
March 2011
page 13-25