Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 325

Configuring IPsec
Note. Due to security reasons, key values will not be displayed; only key names and key lengths will be
displayed.
Once IPsec is configured for IPv6 on the switch, you can monitor the incoming and outgoing packets for
the configured parameters by using the
Inbound:
Successful
Policy violation
No SA found
Unknown SPI
AH replay check failed
ESP replay check failed
AH authentication success
AH authentication failure
ESP authentication success = 25
ESP authentication failure = 0
Packet not valid
No memory available
Outbound:
Successful
Policy violation
No SA found
Packet not valid
No memory available
OmniSwitch AOS Release 7 Network Configuration Guide
show ipsec ipv6 statistics
= 2787
= 0
= 0
= 0
= 0
= 0
= 93
= 0
= 0
= 0
= 5135
= 0
= 19
= 0
= 0
March 2011
Configuring IPsec on the OmniSwitch
command.
page 14-17