Modifying The Source Timeout - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Network configuration guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

Modifying IPMS Parameters
You can also restore the IGMP router timeout on the specified VLAN by entering:
-> ip multicast vlan 2 router-timeout 0
Or, as an alternative, enter:
-> ip multicast vlan 2 router-timeout
To restore the IGMP router timeout to its default value.

Modifying the Source Timeout

The default source timeout (i.e., the expiry time of IP multicast sources) is 30 seconds. The following
subsections describe how to configure a user-specified source timeout value and restore it by using the
ip multicast router-timeout
Configuring the Source Timeout
You can modify the source timeout from 1 to 65535 seconds by entering
followed by the new value. For example, to set the source timeout to 360 seconds on the system if no
VLAN is specified, you would enter:
-> ip multicast source-timeout 360
You can also modify the source timeout on the specified VLAN by entering:
-> ip multicast vlan 2 source-timeout 360
Restoring the Source Timeout
To restore the source timeout to its default value on the system if no VLAN is specified, use the
multicast source-timeout
-> ip multicast source-timeout 0
Or, as an alternative, enter:
-> ip multicast source-timeout
To restore the source timeout to its default value.
You can also restore the source timeout on the specified VLAN by entering:
-> ip multicast vlan 2 source-timeout 0
Or, as an alternative, enter:
-> ip multicast vlan 2 source-timeout
To restore the source timeout to its default value.
page 20-16
command.
command by entering:
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring IP Multicast Switching
ip multicast source-timeout
ip
March 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents