Monitoring Switch Health
Viewing Health Statistics for a Specific Interface
To view health statistics for slot 4/port 3, enter the show health command, followed by the appropriate
slot and port numbers. A screen similar to the following example is displayed, as shown below:
-> show health port 4/3
* - current value exceeds threshold
Port 04/03
Resources
------------------+----------+--------+--------+---------+--------------------
Receive
Transmit/Receive
In the screen sample shown above, the port 04/03 Resources field displays the port resources that are being
measured (for example, Receive displays statistics for traffic received by the switch, while Transmit/
Receive displays statistics for traffic transmitted and received by the switch). The Limit field displays
currently configured resource threshold levels as percentages of available bandwidth. The Curr field
displays current bandwidth usage for the specified resource. 1 Min. Avg. refers to the average resource
bandwidth used over a 1 minute period. 1 Hr. Avg. refers to the average resource bandwidth used over a 1
hour period, and 1 Hr. Max. refers to the maximum resource bandwidth used over a 1 hour period.
page 26-46
1 Min
Limit
Curr
Avg
80
01
01
80
01
01
OmniSwitch AOS Release 7 Network Configuration Guide
Diagnosing Switch Problems
1 Hr
1 Hr
Avg
Max
01
01
01
01
March 2011