Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 180

MC-LAG Topologies
This topology violates the principle that each edge switch can only be part of a single MC-LAG domain
and increases the configuration complexity. Now all the four multi-chassis peers need to have consistent
configurations (for example, LACP System ID in order for the edge switch to be able to negotiate the four
links as part of the same aggregate).
MC-LAG
MC-LAG
This topology introduces the risk of a possible loop indicated by the arrows. Since Spanning Tree will not
run over the MC-LAG aggregates, this loop cannot be prevented.
MC-LAG
MC-LAG
page 8-16
MC-LAG
Edge Switch to Multiple MC-LAG Domains
MC-LAG MC-LAG
Edge Switch to Multiple MC-LAG Domains
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Multi-chassis Link Aggregation
L2 Bridging
L3 Routing
MC-LAG
L2 Bridging
MC-LAG
Loop!!!
March 2011