Table of Contents
Advertisement
Quick Steps for Configuring BFD
4
Optional
Configure a global receive time interval for all BFD sessions using the
:
command. This command defines a default receive time value that is automatically applied when a BFD
session is created. For example:
-> ip bfd receive 500
5
Optional
Configure the receive time interval for a specific BFD session using the
:
receive
command. The value set with this command overrides the global receive time value configured for
the routing instance:
-> ip bfd interface bfd-vlan-101 receive 500
6
Optional
Configure a global detection time multiplier value for all BFD sessions using the
:
multiplier
command. For example:
-> ip bfd multiplier 5
7
Optional
Configure the BFD session detection time multiplier value using the
:
multiplier
command. For example:
-> ip bfd interface bfd-vlan-101 multiplier 5
Note. Demand mode is not supported. The default operational mode is Asynchronous with the echo func-
tion enabled. However, Static Routing and VRRP protocol support BFD in the echo-only operational
mode.
8
Optional
Configure the global BFD echo packet time interval using the
:
command. This command defines a default echo packet time value that is automatically applied when a
BFD session is created. For example:
-> ip bfd echo-interval 500
9
Optional
Configure the echo time interval for a specific BFD session using the
:
echo-interval
command. The echo time interval value set with this command overrides the global echo
time interval configured for the routing instance. For example:
-> ip bfd interface bfd-vlan-101 echo-interval 500
10
Optional
Enable the administrative status of a BFD interface using the
:
command. For example:
-> ip bfd interface bfd-vlan-101 admin-state enable
Note. BFD parameters are not configurable once the BFD administrative status is enabled on the interface.
11
Enable the BFD protocol for the routing instance globally using the
example:
-> ip bfd admin-state enable
page 16-4
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring BFD
ip bfd receive
ip bfd interface
ip bfd interface
ip bfd echo-interval
ip bfd interface
ip bfd interface admin-state
ip bfd admin-state
command. For
March 2011
ip bfd
Advertisement
Table of Contents
