Table of Contents
Advertisement
Configuring IP Multicast Switching
To set the MLD group limit for a VLAN and replace any requests above the limit, use the
vlan max-group
command as shown below:
-> ipv6 multicast vlan 10 max-group 25 action replace
To set the MLD group limit for a port and drop any requests above the limit, use the
max-group
command as shown below:
-> ipv6 multicast port 1/1 max-group 25 action drop
OmniSwitch AOS Release 7 Network Configuration Guide
March 2011
Modifying IPMSv6 Parameters
ip multicast
ip multicast port
page 20-35
Advertisement
Table of Contents
