Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 217

Configuring 802.1AB
3
To control per port management TLV to be incorporated in the LLDPDUs, use the
lldp tlv management
-> lldp port 2/47 tlv management port-description enable
4
Set the transmit time interval for LLDPDUs. To set the timer for a 50 second delay, use the
lldp transmit interval
-> lldp transmit interval 50
5
Set the minimum time interval between successive LLDPDUs. To set the interval for a 20 second
delay, use the lldp transmit delay
-> lldp transmit delay 20
6
Set the LLDPDUs transmit fast start count required for LLDP Fast Restart mechanism to be activated.
Note. Optional. Verify the LLDP per port statistics by entering the
example:
> show lldp statistics
-
----------+--------------------------------------+---------------------+----------
|
Slot/Port| Tx
----------+--------+----------+----------+----------+----------+----------+-----
1/23 52
2/47 50
2/48 50
OmniSwitch AOS Release 7 Network Configuration Guide
command. For example:
command. For example:
command. For example:
LLDPDU
Rx Errors
0 0
50 0
50 0
Quick Steps for Configuring 802.1AB
show lldp statistics
| TLV
Discards | Unknown
0 0
0 0
0 0
March 2011
command. For
| Device
Discards | Ageouts
0 0
0 0
0 0
page 10-3