Ipmsv6 Overview; Ipmsv6 Example - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Network configuration guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

Configuring IP Multicast Switching

IPMSv6 Overview

An IPv6 multicast address identifies a group of nodes. A node can belong to any number of multicast
groups. IPv6 multicast addresses are classified as fixed scope multicast addresses and variable scope
multicast addresses.(See the
IPMSv6 tracks the source VLAN on which the Multicast Listener Discovery Protocol (MLD) requests are
received. The network interfaces verify that a multicast packet is received by the switch on the source (or
expected) port.

IPMSv6 Example

The figure on the following page shows an IPMSv6 network where video content can be provided to
clients that request it. A server is attached to the switch that provides the source (i.e, multicast) IPv6
addresses. Clients from two different attached networks send MLD reports to the switch to receive the
video content.
Video
Multicast Group
(dynamically built)
Network A
OmniSwitch AOS Release 7 Network Configuration Guide
"Reserved IPv6 Multicast Addresses" on page
OmniSwitch
(destination IPv6 address)
Ports on end stations send
MLD requests to receive
multicast traffic.
Network B
March 2011
20-22.)
Source Port
Multicast Stream
(source IPv6 address)
IPMSv6 Overview
Multicast Server
page 20-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents