Hp E840Xa Air Filter Kit - HP E8402A User And Service Manual

HP E840xA Air Filter Kit

Remove and Discard
4 Screws
Insert Filter Into
Bottom Bracket
248 Rack Mounting and Option Installation
An optional air filter kit can be purchased for the HP E840xA mainframe.
Figure B-15 shows how to install the kit.
1. Remove the four screws from the rear panel as shown in Figure B-15.
2. Install the bottom Air Filter Bracket as shown. Use the two pan-head
screws included with the Air Filter Kit.
3. Install the Air filter. Carefully place the filter into the bottom bracket.
4. Attach the top bracket to the mainframe. Hand-tighten the
thumbscrews; do not over-tighten.
1 1
3
Figure B-15. Installing the Optional Air Filter Kit
2 2
Supplied Pan
Head Screws
4
Place Top Bracket
Over the Filter and
Secure Thumb-Screws
Appendix B