Status:questionable:blower:condition - HP E8402A User And Service Manual

STATus:QUEStionable:BLOWer:CONDition?

Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
The
STATus:QUEStionable:BLOWer:CONDition?
representing the contents of the condition register associated with the BLOWer
status group. The condition register continuously monitors the hardware and
firmware status of the instrument. There is no latching or buffering for this register;
it is updated in real time. Condition registers are read-only. The following table
describes each bit in the BLOWer status group:
Bit
0 BLOWer1 (Mainframe fan)
1 BLOWer2 (Power supply fan)
2 BLOWer3 (Power supply fan)
3 Unused
4 Unused
5 Unused
6 Unused
7 Unused
8 Unused
9 Unused
10 Unused
11 Unused
12 Unused
13 Unused
14 Unused
15 Unused
Type Range Default
int16 0 - 32767 none
•
The status bit is set when a blower is outside of its expected speed for its
present level.
*RST does not affect the status system.
STATus:QUEStionable:BLOWer:EVENt?,
STATus:QUEStionable:BLOWer:ENABle
Description
Description
Bit mask indicating which conditions are set (1) or cleared (0)
for the BLOWer status group.
Programming the Enhanced Monitor
query returns an integer
Decimal Value
1
2
4
8
16
32
64
128
256
512
1024
2048
4096
8192
16384
32768
95