SCPI Command Reference
Subsystem
Syntax
Chapter 3
The following section describes the SCPI commands for the HP E8402A Enhanced
Monitor. Commands are listed alphabetically by subsystem and also within each
subsystem.
The CALibration Subsystem is described in detail in
to that chapter for complete calibration and performance verification procedures.
:CALibration
[:ALL]?
:TEMPerature?
:VALue
:TEMPerature <value>
:TEMPerature?
:VOLTage < supply >,< value > Sets calibration voltage value
:VOLTage? < supply >
:VOLTage? < supply >
CALibration Subsystem
Chapter 4
Performs complete monitor calibration.
Calibrates temperature monitoring
Sets the calibration temperature.
Returns the calibration temperature.
Returns calibration voltage value
Calibrates voltage monitoring
Programming the Enhanced Monitor
of this manual. Refer
57