Table of Contents
Advertisement
172 Programming the Enhanced Monitor
These commands are defined in the IEEE 488.2 standard and are found on most
SCPI instruments.
Syntax:
*CLS
*ESE <mask>
*ESE?
*ESR?
*IDN?
*OPC
*OPC?
*PSC
*PSC?
*SRE <mask>
*SRE?
*STB?
*RST
*TST?
*WAI
IEEE Common Commands
Description
Clear all status groups and empties the error queue.
Sets enable register of the standard event status group
Returns enable register of the standard event status group
Return events of the standard event status group
Return the SCPI Identification String
Sets the operation complete bit when pending events finish
Returns 1 when pending events are finished
Sets the power-on state clear flag
Returns the power-on state clear flag
Sets the service request enable mask for the Status Byte
Returns the service request enable mask for the Status Byte
Returns the contents of the status byte
Sets the module to a known state
Returns the self-test result
Waits for all pending operations to complete
Chapter 3
Advertisement
Table of Contents
