Status:questionable:power:level? <Supply>[,Min|Max] - HP E8402A User And Service Manual

STATus:QUEStionable:POWer:LEVel? <supply>[,MIN|MAX]
Parameters
Returned Data
Comments
Error Conditions
Reset Condition
Related
Commands
108 Programming the Enhanced Monitor
The
STATus:QUEStionable:POWer:LEVel?
representing the power levels of each power supply in watts.
Name Type
< supply > enum. P24, P12, P5
N2, N5P2, N12
N24, TOTal
optional optional MIN, MAX
parameter enum.
Type Range
float32
•
This command is not supported for all power supplies. If the power of the
mainframe is off, this query will return the last measurement made before
power turned off.
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number Message
-241 "Hardware missing"
*RST does not affect the status system.
STATus:QUEStionable:CONDition?, STATus:QUEStionable:EVENt?,
STATus:QUEStionable:ENABle?, STATus:QUEStionable:ENABle
query returns a floating number
Range Default
none Indicates which power supply wattage is
being queried. P5 is positive 5 Vdc
supply, N12 is negative 12 Vdc supply,
etc.
none When added after <param> , returns the
maximum and minimum wattage limits.
Default
Power level of < supply >, in Watts.
none
Power supply doesn't support power measurements.
Description
Description
SYSTem:ERRor?
Probable Cause
Chapter 3
query.