Table of Contents
Advertisement
Table A-3
Computer Setup—Advanced (for advanced users) (continued)
Option
Device Options
Option ROM Launch
Policy
Changing BIOS Settings from the HP BIOS Configure Utility
(HPBCU)
Some BIOS settings may be changed locally within the operating system without having to go through the
F10 utility. This table identifies the items that can be controlled with this method.
BIOS setting
Language
Set Time
Set Day
Default Setup
Apply Defaults and Exit
SATA Emulation
USB Storage Boot
UEFI Boot Sources
Legacy Boot Sources
Embedded Security
Device(Device Security)
System Audio
Network Controller
40
Appendix A Computer Setup (F10) Utility, BIOS Settings
Heading
Allows you to set:
Integrated Graphics (Auto/Force) – Use this option to manage integrated (UMA) graphics memory
●
allocation. The value you choose allocates memory permanently to graphics and is unavailable to
the operating system. For example, if you set this value to 512M on a system with 2 GB of RAM, the
system always allocates 512 MB for graphics and the other 1.5 GB for use by the BIOS and operating
system. Default is Auto which sets memory allocation to 512 MB.
If you select Force, the UMA Frame Buffer Size option displays, which lets you set the UMA memory
size allocation between 256 MB and 1 GB.
●
USB Port Configuration (Auto/Force 2.0)
●
S5 Wake on LAN (enable/disable)
●
Printer mode (Bi-Directional, EPP + ECP, Output Only). Default is EPP+ECP.
●
Num Lock State at Power-On (off/on). Default is off.
●
Internal Speaker (some models) (does not affect external speakers) – Default is enabled.
Allows you to set:
●
Onboard NIC PXE Option ROMs (enable/disable)
M.2 Slot Option ROM Download (enable/disable)
●
●
PCIE Slot Option ROM Download (enable/disable)
Default value
English
00:00
01/01/2011
None
Disable
AHCI
Before SATA
Windows Boot Manager
USB floppy/CD
Device available
Device available
Device available
Other values
Francais, Espanol, Deutsch, Italiano, Dansk, Suomi, Nederlands, Norsk,
Portugues, Svenska, Japanese
00:00:23:59
01/01/2011 to current date
Save Current Settings as Default; Restore Factory Settings as Default
Enable
IDE
After SATA
USB Floppy/CD; USB hard drive
Hard drive
Device hidden
Device hidden
Device hidden
Advertisement
Table of Contents
Troubleshooting
