Status:questionable:temperature:event - HP E8402A User And Service Manual

STATus:QUEStionable:TEMPerature:EVENt?

Returned Data
Comments
Reset Condition
Related
Commands
112 Programming the Enhanced Monitor
The
STATus:QUEStionable:TEMPerature:EVENt?
representing the value of the event register for the TEMPerature status group.
The event register latches positive transition events from the condition register. A
positive transition occurs when a condition makes a transition from a low to a high
state. Bits in the event register are latched, and once set, they remain set until cleared
by a STATus:QUEStionable:TEMPerature:EVENt?
There is no buffering; so while an event bit is set, subsequent events corresponding
to that bit are ignored. Event registers are read only.
Type Range Default
int16 0 - 32767 none
•
Refer to STATus:QUEStionable:TEMPerature:CONDition?
each bit in the TEMPerature status group.
*RST does not affect the status system, use *CLS to clear all event registers.
STATus:QUEStionable:TEMPerature:CONDition?,
STATus:QUEStionable:TEMPerature:ENABle, *CLS
Description
Bit mask indicating which events are set (1) or cleared (0) for
the TEMPerature status group.
query returns an integer
query or *CLS (clear status).
for a description of
Chapter 3